[Milsurplus] R-44 Help Needed

[Joe Connor]

 OK, I got it out. I had to pry the case a tiny bit and spray a little bit of WD-40 where the inside of the case meets the railing of the receiver. That did the trick, although it was still a chore.
                            Joe Connor
    On Thursday, June 28, 2018, 8:29:15 PM EDT, Joe Connor via Milsurplus <milsurplus at mailman.qth.net> wrote:  
 
 I'm trying to start working on a Hallicrafters R-44, the airborne version of the S-27/S-36, and I can't get the thing out of its case.
I removed the two small screws on the top and loosened the two retaining screws on the back, but it won't budge. I've had a couple of these in the past and I've always been able to get them out with a little effort. There's just nothing to hold onto or to get leverage from.
Any tips, suggestions etc.?
As always, thank you for your guidance.
                            Joe Connor


|  | Virus-free. www.avast.com  |

______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20180629/7f7e7920/attachment.html>