[Milsurplus] 12 Volt Dynamotor BD-77A

[Mike Feher]

Mike –

 

You should try and locate a spares kit for the unit. They always seemed to have an abundance of brushes. 73 - Mike

 

Mike B. Feher, N4FS

89 Arnold Blvd.

Howell NJ 07731

848-245-9115

 

From: milsurplus-bounces at mailman.qth.net <milsurplus-bounces at mailman.qth.net> On Behalf Of Mike Heltborg
Sent: Tuesday, August 28, 2018 12:38 AM
To: milsurplus at mailman.qth.net
Subject: [Milsurplus] 12 Volt Dynamotor BD-77A

 

Hi Folks,

 

I am sitting up a BC-191 with a BC-312 and I have a BD-77A  12 v dynamotor to run the BC-191.

It is rated at 12VDC at 40 amps for 1000VDC at .350 Ma.output.  My problem is that it is missing the Brushes for the 12 VDC side of the dynamotor.  

Does anyone have a set of brushes or info or ideas where to find a set of them for this dynamotor.

Any help would be great!

Thanks

Mike W7NPA

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20180828/5d57b221/attachment.html>