[Milsurplus] T-17 Switch

[B. Smith]

  I sure would give the JB Weld a try.
Info on the T-17 can be found here:
http://k4che.com/T-17/T-17.htm

k4che

On 8/11/2018 11:50 AM, Mark K3MSB wrote:
> I had never taken a T-17 microphone apart and thought the switch/relay 
> assembly was a friction fit assembly.    As I gently tried to pry the 
> relay section up, the Bakelite portion broke.
>
> So after it's busted I see how the switch is screwed in....
>
> By chance,  anybody have a spare button/relay (for 3 conductor cables) 
> they'd care to sell?   A bust up mic with a good switch/relay would 
> work too.
>
> Since the switch pushes against the relay arms,  I'm not sure just 
> using JB Weld or similar would fix the break. Anybody every do this 
> successfully?
>
> Crud.......
>
> 73 Mark K3MSB
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


--