[Milsurplus] WANTED: 6-PIN 1-1/8" DIA. MALE CHASSIS CONNECTOR

[Hubert Miller]

I'm looking right now at a photo of the CW-62008A junction box. The 134 F connector from the dyno plugs into it.
Just to be clear, you are saying this M chassis connector,  on the junc box,  is 1-1/4 inch, while you require 1-1/8 inch?

BTW, I have 2 RA-1's I think I will sell, spring-summer 2018. These both have orig connector in place.
-Hue



From: WA5CAB at cs.com [mailto:WA5CAB at cs.com]
Sent: Monday, November 20, 2017 11:52 PM
To: Kargo_cult at msn.com; milsurplus at mailman.qth.net
Subject: Re: [Milsurplus] WANTED: 6-PIN 1-1/8" DIA. MALE CHASSIS CONNECTOR

134 is the female cable plug.  The mating male is 167.

But the receiver control box uses the 7-pin 171 which mates with caple plug 135.

And CORRECTION - the GF/RU dynamotor does use the small 6-pin.  It's the SCR-183/283 that uses a different one.

In a message dated 11/20/2017 21:36:52 PM Central Standard Time, Kargo_cult at msn.com<mailto:Kargo_cult at msn.com> writes:

I "may" have a scroungy partser junction box for the RU. I would have to dig and look toward end of month. Would the 134 connector from that do?

-H

>Subject: [Milsurplus] WANTED: 6-PIN 1-1/8" DIA. MALE CHASSIS CONNECTOR



Looking for a 6-pin, 1-1/8" nominal diameter male large banana pin type chassis connector..

Needed to restore a Bendix RA-1B.

Same as Signal Corps SO-45.  Mates with #134 cable connector from RU series and some other Navy connectors.  Also mates with PL-106 and PL-90 except for locking mechanism.

Possible sources are RU Liaison receiver dynamotor (but not GF/RU or SCR-183/283 dynamotor, which is 1-1/4" dia.), GP-6 and GP-7, RM-21-A/B/C but not D.  Probably others.  ID of the metal retainer sleeve is about 1.139"  If you have one with a bad or missing sleeve, I have one of those.




Robert & Susan Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20171121/4e280619/attachment.html>