[Milsurplus] pp4763a problem

[Richard]

I checked the instruction books, and you change from 115 to 230 volts by 
changing links.  No picture so it's supposed to be obvious....

Richard, AA1P


On 02/01/2017 08:44 AM, Richard wrote:
>
> Ops, mine is a PP-1104C/G.  Different but the same ballpark. Look for 
> about one Ohm.
>
> Richard, AA1P
>
>
> On 02/01/2017 08:31 AM, Richard wrote:
>>
>> I have one too.  Breaker open, infinity, breaker closed, 1 Ohm.  I 
>> think you wired it wrong - hey, no-one is perfect, not even me.
>>
>> Richard, AA1P
>>
>>
>> On 02/01/2017 06:56 AM, JEFF CICCONE wrote:
>>>
>>> folks. i have the big heavy 50a 24v dc power supply.  i wired it up 
>>> for 230 volt. when i plugged it in it tripped the breaker.  when i 
>>> checked the resistance between the 230v input with the circuit 
>>> breaker on the unit open it was ..2 ohms. when i closed the breaker, 
>>> same reading.  i'm just wondering if i'm picking up the coil or 
>>> something else. any ideas?  thanks. jeff ciccone kg2bz
>>>
>>>
>>>
>>> ______________________________________________________________
>>>
>>
>>
>>
>> ______________________________________________________________
>> Milsurplus mailing list
>> Home:http://mailman.qth.net/mailman/listinfo/milsurplus
>> Help:http://mailman.qth.net/mmfaq.htm
>> Post:mailto:Milsurplus at mailman.qth.net
>>
>> This list hosted by:http://www.qsl.net
>> Please help support this email list:http://www.qsl.net/donate.html
>
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20170201/bce3c4e1/attachment.html>