[Milsurplus] [ARC5] ID Ham-Modified Command Set TX?

[Glen Zook]

There is a collapsed VFO, but it only has 1-each 6AG7, starting on page 87 of the Command Sets #106 published by Cowan Publishing (CQ Magazine).

 Glen, K9STH 
Website: http://k9sth.net

      From: Don Merz via ARC5 <arc5 at mailman.qth.net>
 To: ARC-5 List <arc5 at mailman.qth.net>; milsurplus <milsurplus at mailman.qth.net> 
 Sent: Sunday, April 16, 2017 12:41 PM
 Subject: [ARC5] ID Ham-Modified Command Set TX?
   
Estate sale I went to delivered a homebrew, ham-modified 80M transmitter made out of an 80M command set transmitter. The odd part is that the whole thing is collapsed into a unit no deeper than 4-5 inches. So all the 1625 tube area, the roller inductor, etc. is all gone. What's left is the front panel with dial, and 3 tubes in the rear--two 6AG7s and a VR-150 regulator, One the back is an SO-239 and octal p[ower connector. The front has only the dial, a 1/4 inch jack for the key I assume and a toggle switch.
Can anyone pint me to the source of this modified rig/VFO?

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20170416/fda2d01e/attachment.html>