[Milsurplus] Looking for TBX Xmit Cable Plugs

[WA5CAB at cs.com]

Rob,

OK.  So it's the Contractor's part number.  FYI, very seldom have I ever 
seen a radio where any of the parts had the Contractor's part numbers on them. 
 BC-611 and maybe BC-620 & 659 are the only ones that come to mind.

If there was a PL-nn equivalent to the 49040, I've not come across it.  
Note that the insert body material is different from the black bakelite 
normally used.  The same connector is used with the TBW.

I came across the explanation as to why the receiver power cord and plugs 
aren't listed.  See page 2-0 in NAVSHIPS 900,624.  Note that in the cabling 
diagram, the P-numbers aren't shown for the receiver cable.  And in the text 
above, it says that W-401 is supplied with the radio equipment (the TBX-8).

In a message dated 04/02/2017 16:10:43 PM Central Daylight Time, 
rob at k7tgu.com writes: 
> Robert,
>   
>  Thanks for your input. Attached is the origin of the PC-18 reference. You 
> can see your 49040 reference is on the same document line. Actually, it 
> would be interesting to know if there was a "PL" designation for this plug. 
> This attachment is from the TBX-7 / 8 CRF-20337 Vibrator Power Supply Manual 
> as you can see by page heading. I have the battery cable plug (PL-74) 
> listed in this document along with the receiver plugs (PL-P63) which strangely 
> are not listed in this manual even though two are required to connect the 
> vibrator supply to the transceiver. Perhaps someone in the group has already 
> resolved these issues.
>   
>  Rob K7TGU
>  
> >> 
>> 
> 

Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/milsurplus/attachments/20170402/095754d2/attachment.html>