[Milsurplus] FS: Working RBZ receiver + headphones

[Mike T via Milsurplus]

One of my recent projects was getting an RBZ receiver back to working order. The power cable was in a severe state of degradation and so I fabricated a new power cable from four conductor microphone cable and installed the original power connector onto this new cable. I also used this same cable to create a new headphone cable with a 1/4" female jack at the end so that this radio may be used with any headphones with a 1/4" plug. The original headphone cable and connector are included should you wish to revert back to factory stock condition. I also purchased and installed a 9V cell holder that was fashioned in the same shape, size and similar appearance to the original B battery that would power the plate circuit. Finally, I added an 1/8" female jack to the end of the antenna post to allow this to be used with various simple wire antennas. This radio works superbly, is very sensitive and sounds great. The only modification I've done to the circuit is
 completely reversible. I've adjusted the antenna and oscillator trimmers so that the receiver receives the 49mhz shortwave band at the top end. This can be very easily be returned to the radios factory coverage of 2 - 5.8mhz should you wish to do so as it only requires readjustment of the two trimmers with an alignment tool.

Below are links to a few photos.

http://i.imgur.com/YY9ZTA0.jpg

http://i.imgur.com/g3oWrsn.jpg

http://i.imgur.com/42iAjLW.jpg

I've had fun with this project. I'm looking to make a bit of space in my collection and so I would like to find a new home for this. I'd like $450 plus shipping and the radio will be insured for its full value.

If you have questions feel free to e-mail me at gtsrmike at yahoo.com