[Milsurplus] FS RT-834 W/LSB Kit, Etc.

John Watkins via Milsurplus milsurplus at mailman.qth.net
Thu Feb 26 11:11:40 EST 2015


 Hi All,
Still cleaning out stuff that I will never get around to.  
First is an RT-834 (Exciter for the GRC-106A 100Hz unit).  It works fine in Rx, never measured the Tx output but could hear it in my TS-930 USB when I tried in into a 50 Ohm load.  It has one freq selector that has the detent ball missing.  I have a spare switch that can be put in. It also had a hole in the front panel that has been repaired and repainted.  The bottom edge has part of the lip missing.  I also have a replacement front panel if I can find it that I will include.   Have a LSB kit for the GRC-106 from Jim Karlow) and associated filter, wires, switch, installation instructions, etc. that I can include.  $300 for the RT-834, $400 for the RT and LSB kit.  I do believe that I have the manual on the GRC-106 and will include it if I can find it.  I would prefer for it to be picked up,
Harris RT-3090 PRC-117A W/ 50 Watt amp and mount/power supply, Battery box.  No cables.  Had 28 volts to it, not working.  I have the manual w/ schematics.  Just don't have the time to fix it. This one has extra cards as I really need to clean out this stuff.   $300, once again, would prefer it to be picked up.
RT-524A works fine, also have an R-442 both with mounts and the test set VRC-78 (I think) with cables.  TX and RX worked fine when last powered up a few years ago now.  $300 for both.  I think I have some manuals on them.   $300, once again, would prefer it to be picked up.
At this point, I am planning on going to the greater Houston hamFest and can deliver them there.  I would also consider dropping them off in San Antonio, or the Austin Texas area.  I can pack these and ship them, but that would be extra for the shipping UPS or FEDEX.  Would really prefer pick up as these all weigh a bit.
Other stuff coming as I dig it out.
Thanks,
John  WD5ENU







More information about the Milsurplus mailing list