[Milsurplus] [ARC5] R-392 power connector question

[Dave Merrill]

Pins A (Plates) and D (Filaments) should both be connected to +28 Volts.
Pin E is Ground.


On Fri, Mar 14, 2014 at 10:23 AM, Jay Coward <jcoward5452 at aol.com> wrote:

>
>
> I am wireing up a power connector for R-392. I have the pin out and the
> +28V and ground are obvious. Do any other pins need to be grounded or tied
> to +28V or jumpered  for stand alone receiver operation? This is a new
> radio for me.
>  Thanks,
>              Jay KE6PPF
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>