[Milsurplus] RBM question

[Meir WF2U]

The RBM series receivers have two power supplies: a 12 VDC dynamotor supply
(CAY-21387 or CCT-21387) which contains the control unit and two power
connectors to select either receiver. If the fixed installation
configuration with the AC supply is used (CAY 20086 or CCT-20086), there is
a control box (CAY-23278 or CCT-23278 depending on the manufacturer), which
is connected to the AC supply and selects either receiver via the two power
connectors, one for each receiver. In this case, the selector switch inside
the AC supply should be on "Dual". If two separate AC supplies are used, the
switch inside the supplies should be on "single". 
Try William Perry for the power plugs.

73, Meir WF2U
Landrum, SC

-----Original Message-----
From: Milsurplus [mailto:milsurplus-bounces at mailman.qth.net] On Behalf Of
bavarianradio at comcast.net
Sent: Wednesday, August 20, 2014 3:05 PM
To: Milsurplus at mailman.qth.net
Subject: [Milsurplus] RBM question

Hello All, I own a pair of RBM-5 receivers and the power supply, but no
cables. How did the power supply connect to the receivers. There is only one
connector on the P.S. Was there a  switchbox or a split in the cable?? What
is the chance I may find a cable? Can I just buy the connectors? If so, what
do I need? Thanks 73 Ross W1EKG
______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html