[Milsurplus] Need Tubes
Bill Cromwell
wrcromwell at gmail.com
Mon Sep 30 08:45:40 EDT 2013
Hi Clete,
I have quite a few of the loctal tubes but very few of them 12 volt
parts. I do have *one* 14H7 and I'll get it on it's way if you still
need it. If you do something nasty like rewiring for 6 volt tubes (7a#
types) and can cross to some substitutes - I have a a lot more of those.
You might also be able to use some 6 volts tubes along with one 12 volt
tube and supply 12 volts to the heater string without rewiring anything.
Or are you using the receiver in your 24 volt airplane?
I have the ARC5 command set receivers and I run them on the original 24
volt series/parallel heater wiring. One of them had been modified to run
a 12 volt heater supply and I had to change that one back so they would
all be the same (and original). You may not want to change yours, too.
73,
Bill KU8H
On 09/30/2013 07:55 AM, C.Whitaker wrote:
> de WB2CPN
> It's old, but does anyone have an idea where tubes for
> my little panel-mount aircraft LF receiver can be found?
> Used for LF Beacons, Radio Ranges, and Control Towers.
>
> 14H7 (2)
> 14J7 (1)
> 14R7 (1)
> 28D7 (1)
>
> Thanks,
> 73 Clete
> +++++++++++++++++++++++++++++++++++++++++++
More information about the Milsurplus
mailing list