[Milsurplus] WTB: Inverter Connector

[J. Forster]

If I cannot find a connector, I will make one up from MS connector pins,
but I'd much rather have the proper part.

Best,

-John




> Since I assume it will be hidden I would just cobble up a connector
> using pins and epoxy.
> Be sure and grease the pins.   :-)
>
> An example can be seen at:
> http://k4che.com/WS19/WS19Connector/WS19Connectorpg1.htm
>
> Z
>
>
>
> On 5/5/2013 3:16 PM, J. Forster wrote:
>> Hi,
>>
>> I just bought a static inverter that takes 28 VDC and puts out 15 VAC
>> 400
>> Hz, and would like a mating connector or mounting rack w/ mating ARINC
>> connector.
>>
>> You can see an identical unit:
>>
>> http://www.american-milspec.com/p-6338-cf-electronics-200810-military-aircraft-radio-power-inverter-22-32vdc120vac-400cps-700va.aspx
>>
>> And, yes, I have tried Bill Perry w/o any response.
>>
>> If you have something suitable, please email me off-list.
>>
>> TIA,
>>
>> -John
>>
>> =============
>>
>> ______________________________________________________________
>> Milsurplus mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Milsurplus at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>