[Milsurplus] T-47/ART-13 into 50 ohm load

[Meir WF2U]

So far, I only used the ART-13's I have on the 75/80 M band and I use a
fixed 2000pf cap between the CAP terminal and ground, with control C on 7.
It gives me a good match across the band with 92-100 watt output into 50
ohms (using the DY-17/ART-13 dynamotor), with the plate current meter in the
correct range,  with minimum tweaking of controls D and E. D is between 10
and 30, and E between 120 and 130. The ART-13 feeds a 256 foot long Carolina
Windom via an MFJ automatic antenna tuner. 
These setting are very similar on both of my ART-13's currently operational;
one is a T-412/ART-13B and a T-47/ART-13.

73, Meir WF2U
Landrum, SC

-----Original Message-----
From: milsurplus-bounces at mailman.qth.net
[mailto:milsurplus-bounces at mailman.qth.net] On Behalf Of WA5CAB at cs.com
Sent: Saturday, March 23, 2013 12:00 PM
To: milsurplus at mailman.qth.net
Subject: [Milsurplus] T-47/ART-13 into 50 ohm load

How well does a T-47 (or equivalent) match a 50 ohm resistive load on say 3 
to 10 MC?  Is there any standard outboard "fix" like an UnUn or shunt 
variable capacitor?  Purpose would be to feed a remote antenna tuner.

Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html