[Milsurplus] Mystery mount

[J. Forster]

The APN-1 mount has two pins in front. The chassis is held into the case
by two thumb screws on the front panel.

-John

=================



> Possibly, as the APS-13 was RCA also. About the same size as the APN-1
> though it's not entirely clear to me how the unit or its mount was secured
> inside the case. The 2 sliding catches would indicate that there had to be
> pins sticking forward from the units & there are none on the APN-1. (I
> have both the APS-13 & APN-1.)
>
>
>
> On Tuesday, December 24, 2013 12:13 PM, J. Forster <jfor at quikus.com>
> wrote:
>
> And the APS-13, I think.
>
> -John
>
>
> ============
>
>
>
>> Thanks, John. I have it on good authority that this particular case was
>> used for a variety of RCA airborne radio sets besides the APN-1, such as
>> the APG-4.
>>
>> Jack
>> ______________________________________________________________
>> Milsurplus mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Milsurplus at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net/
>> Please help support this email list: http://www.qsl.net/donate.html
>
>>
>>