[Milsurplus] Crosley REP with Bad Audio Output Tranny

[John Hutchins]

Dave -
IF the inside is tar - Then go to goodwill or thrift store and get a 
hotplate or electric skillet.
Get some ranch gloves or tongs heat up transformer and tar,  and pour it 
out.
Melting point of roof tar is 65.5 degrees Celsius, ~= 150 degrees F.
Hutch



On 8/3/2013 8:30 AM, David Stinson wrote:
> Thanks to everyone who helped with this.
> The output transformer is bad.  I do have an "open frame" replacement 
> that works well and will fit inside the original
> rectangular transformer case.   However, the original is potted.
>
> I could remove the end pieces and melt the gloop out with
> a propane torch.  Anyone have experiance in doing it some other way?
>
> 73 DE Dave AB5S
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>