[Milsurplus] WS-19 response

[J. Forster]

True, although the 12 pin Female Pye connector is hard to find.

The signals on the connector are:

A-   mike, phones, and pressel
B-   mike, phones, and pressel
I/C- mike, phones, and pressel

and I think there is a ground and +12 VDC

In CW mode only, the T/R switching is done by a switch on the key jack... 
as long as a key is polugged in, the unit is in Tx.

-John

===========



> You don't really need an expensive control box and dogbone
> cable with two connectors - to get it on the air all you need is
> a single connector, if I recall correctly. You can find these on
> eBay occasionally, or a list member may have one.
>
> One caution: the keying circuit has the 'cold' end of the key
> up at the screen grid supply potential, so use a keying relay
> or at the least, a well-insulated key.
>
> 73, ian K3IMW
>
>
>
> On Tue, Apr 16, 2013 at 6:08 AM, <TVComlGuy at aol.com> wrote:
>
>> Thanks to all who responded to my request for information for the WS-19
>> I
>> bought.  The concensus  is that I need a control box and it's
>> interconnecting cable.
>>
>> Does anyone have these for sale or know where I can get them?
>>
>> 73//Ron, KB0WAR
>> ______________________________________________________________
>> Milsurplus mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Milsurplus at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>