[Milsurplus] Small RG-174 Connector ID Needed

[J. Forster]

It's not an SMB ( or SMA or SMC) for certain. It looks pretty close to a
cheapie connector used by Tektronix to interconnect PCBs with coax inside
instruments.

Try downloading a 7603 or 7704 manual and looking at the IPL and
crossreferencing the manufacturer/part numner there.

You could also ask on the Tekscopes2 Group.

-John

========

> I don't think what you have is SMB but if you can't find the exact
> replacement, I would recommend replacing with SMB.  Good to several GHz
> and very common to locate and buy.
> http://www.amphenolrf.com/products/smb.asp?N=0&sid=5043F30079E5617F&
>
>
> -----Original Message-----
> From: milsurplus-bounces at mailman.qth.net
> [mailto:milsurplus-bounces at mailman.qth.net] On Behalf Of B Smith
> Sent: Sunday, September 02, 2012 10:31 PM
> To: milsurplus
> Subject: [Milsurplus] Small RG-174 Connector ID Needed
>
> I am trying to come up with a series ID  or ID this type connector used on
> smaller RG-174 type of cable.
>
> http://k4che.com/SG2000/SG2000%20Connector.htm
>
> breck k4che
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>