[Milsurplus] Attaching cable to MS connectors

[COURYHOUSE at aol.com]

never forget the   threaded collar....    did that  once....  ONLY ONCE!
 
Ed#
 
 
In a message dated 10/17/2012 6:22:15 P.M. US Mountain Standard Time,  
jfor at quikus.com writes:

The  Installation on Operation manuals for several sets have assembly
drawings  in the rear. Those are a good place to start.

You strip the wire  according to the print, and then assemble in layers.

Things like the  clamp, boot, backshell, washers and gaskets, and knorled
outer nuts go on  next.

You need to put precut insulating sleeves on each wire before  soldering.
Also, look at the pins. One side is cut out and you solder from  the cutout
side. This tells you what order to solder the pins,  BTW.

-John

===============




> I need to put  a connector on the end of a 37-conductor cable.  I've never
> had  any instruction nor seen any instructions on the proper way of doing
>  it - I've fumbled through doing it myself, but that was when I was  much
> younger.  Does anybody know a source of good instructions  for doing this
> kind of job?
>
>
> jhhaynes at  earthlink dot net
>  ______________________________________________________________
>  Milsurplus mailing list
> Home:  http://mailman.qth.net/mailman/listinfo/milsurplus
> Help:  http://mailman.qth.net/mmfaq.htm
> Post:  mailto:Milsurplus at mailman.qth.net
>
> This list hosted by:  http://www.qsl.net
> Please help support this email list:  http://www.qsl.net/donate.html
>
>


______________________________________________________________
Milsurplus  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/milsurplus
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:Milsurplus at mailman.qth.net

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html