[Milsurplus] Attaching cable to MS connectors

[J. Forster]

The Installation on Operation manuals for several sets have assembly
drawings in the rear. Those are a good place to start.

You strip the wire according to the print, and then assemble in layers.

Things like the clamp, boot, backshell, washers and gaskets, and knorled
outer nuts go on next.

You need to put precut insulating sleeves on each wire before soldering.
Also, look at the pins. One side is cut out and you solder from the cutout
side. This tells you what order to solder the pins, BTW.

-John

===============




> I need to put a connector on the end of a 37-conductor cable.  I've never
> had any instruction nor seen any instructions on the proper way of doing
> it - I've fumbled through doing it myself, but that was when I was much
> younger.  Does anybody know a source of good instructions for doing this
> kind of job?
>
>
> jhhaynes at earthlink dot net
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>