[Milsurplus] SE-6861 transceiver

[BenG4BXD]

Yes Eugene, its the correct mic. Might be a low insert of course but 
need other users thoughts to prove that.

Ben.



Subject: RE: [Milsurplus] SE-6861 transceiver


Are you using the stock mic? I haven't experimented to check the audio, 
so mine could be similar to yours (don't use it much) 73 Eugene W2HX 
-----Original Message-----From: milsurplus-bounces at mailman.qth.net 
[mailto:milsurplus-bounces at mailman.qth.net] On Behalf Of BenG4BXDSent: 
Friday, May 11, 2012 11:55 AMTo: armyradios at yahoogroups.comCc: 
milsurplus at mailman.qth.netSubject: [Milsurplus] SE-6861 transceiverDoes 
anyone with the SE-6861 transceiver find the 'talk power' on ssb to be 
low?I am getting full o/p on CW, it just seems on ssb that there is not 
much punch from the set, I don't know if there is a vogad or such on 
the mic audio but I feel there could be more o/p when speaking into the 
mic. On a whistle there's a lot more o/p. Even allowing for the meter 
lag I get a far better o/p when using my VRC247 for instance.Anyone 
found this problem and corrected it? (Is there a pot inside one can 
twiddle?).cheers, Ben G4BXD.  
______________________________________________________________Milsurplus 
mailing listHome: 
http://mailman.qth.net/mailman/listinfo/milsurplusHelp: 
http://mailman.qth.net/mmfaq.htmPost: 
mailto:Milsurplus at mailman.qth.netThis list hosted by: 
http://www.qsl.netPlease help support this email list: 
http://www.qsl.net/donate.html