[Milsurplus] RA-10DB / TA-12B Component List

[J. Forster]

Mike,

There are plenty of RA-10s around that do not have the loop relay
"penthouse" on the receiver front panel. Furthermore, I've seen 
instructions for adding the loop relay in the field. It's a simple job.

I'm not so sure the loop stuff was an integral part of all installations.

-John

===================



> I had left out the important MP-28BA in my previous post.
>
> Bendix RA-10DB/TA-12B installation:
>
> RA-10DB Receiver: 150-400, 400-1100, 2000-5000, 5000-10000 kHz
> MR-11D  DF loop relay unit, part of RA-10DB
> MR-9B   Receiver control box
> MN-52B  DF loop control box
> MN-20E  DF loop
> TA-12B  Transmitter: 300-600, 3000-4800, 4000-6400, 4370-7000 kHz
> MP-28BA Modulator/Dynamotor
> MT-53B  MF tank coil
> MT-51C  Transmitter control box
> MT-31C  Transmitter tuning meter
> MT-11B  Morse key
> MS-14B  System junction box
> MS-18B  Microphone jack box
>
> Mike / KK5F
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>