[Milsurplus] High Voltage DC to DC transistor 500 watt power supplies

[Bruce Gentry]

In all likelyhood, they are for replacing the dynamotor in the T-195 
transmitter.  No bearings and brushes to tend,  far less inrush current 
on startup, but the transmitter is still almost as noisy. Despite what 
it may sound like on the air, a T-195 user is probably not catching up 
on vacuuming while on the air!

     Bruce Gentry, KA2IVY
>
>> I have two Signal Corps part number: SM D-283619 transistor HV
>> supplies.  They are solid state and appear to be dynamotor styled
>> replacements.  They are made by Jordan Electronics, part number
>> AU-0261.  They take 27.5 VDC in, at 25 amps and output 1000 VDC at .5
>> amp.  They appear to be in good condition, although I haven't attempted
>> to run them.
>>
>> They are available for sale or trade to any who could use them. Anyone
>> interested?
>>
>> Thank you for your attention.
>> 73,
>> Ray, W4BYG
>> Cleveland, TN
>> ______________________________________________________________
>> Milsurplus mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Milsurplus at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>