[Milsurplus] BC-375 HV fuses needed

[Gary Pewitt]

I'm not trying to be a wise a** but would that work at high voltage?  I 
thought high voltage fuses were -large- to prevent arc over when they 
blow.  Some are even packed with sand for that purpose.  Please correct 
me if I'm wrong.  It won't be the first time.    73  Gary  N9ZSV



On 9/12/2011 6:23 AM, David Stinson wrote:
> I have a couple of these HV F-12 fuses I put in a vice
> and ran a long drill bit through the center of them.
> I inserted one of the Littlefuse Pico-fuses like this:
> http://www.talonix.com/shop/item.aspx?itemid=8421
> with the wire pigtails and soldered to the end bells.
> Works good.  They cost about a buck apiece.
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>    


-- 
Gary Pewitt   N9ZSV
1500 French Prairie Rd
Booneville, AR  72927