[Milsurplus] TV-2 tube tester question

[John Hutchins]

de HL1FB/WW6N

There is a web page on how to repair the meter open circuit.
-Hutch

On 3/25/2011 7:20 PM, HL1FB wrote:
> Hello
> I recently acquired a military TV-2C/U tube tester and I am in the process of
> repairing it. I found the PERCENT QUALITY meter is not functioning.
> I want to know the specification of the PERCENT QUALITY meter.
> Mine looks open circuited and I need to know what the internal resistance is
> to rebuild it. On the face plate of the meter it is written 100uA full scale but
> I believe it is 100uA at point 100 anf 150uA at full deflection(full scale at point 150).
> If someone has a good TV-2, could you please measure it and let me know?
> All Tv-2/U, TV-2A/U, TV-2B/U and TV-2C/U should use the same meter.
> TV-2 manual does not specifify the meter resistance.
> This meter is different from TV-7 meter.
> Thanks in advance.
> de HL1FB/WW6N
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>