[Milsurplus] Module ID

[John Hutchins]

Glenn -
Your phone, or have a camera?
Snap some pics and up load them to Photo Bucket,or Google - Picasa, we 
are all in the dark here ;-}
It is free.
Hutch


On 7/10/2011 10:39 PM, Glenn Little WB4UIV wrote:
> I have some modules that are from an estate.
> I think that these may be for a military portable radio.
> These are 2.25" long and 0.75" high.
> These have gold pin connectors.
> These connectors have a slit that allows these to mate with the same
> connector pin rotated 90 degrees.
> These connectors mount to the board with two solder tabs and are
> 3/16" long and 3/32" high.
> The pin spacing is about 3/32" with the spacing maintained with not
> installed pins.
> The board material is tan fiberglass about 1/32" thick.
>
> Any ideas as to what these modules may be from?
>
> Thanks
> 73
> Glenn
> WB4UIV
>
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>