[Milsurplus] BC-348

[Joe Walden]

>From Joe w5jdy in Okla...   Hello all members of the various repeaters.  I
have come-on to a BC-348 P series that is missing some parts ...    There
are only 3 bathtub caps present and there should be 6 of them..  I would
like to find three more like the originals that are there..   They are all
alike.   They measure approximately 2.0" tall x 1.25" x .75"..  They are .5
x .5 at 250 volts..  They have two terminals on the top and they have a
common case ground..  They mount with two screws at the base..  I am trying
to put this receiver back to its original state..  I know I could use
substitutes but I have tested the ones that are there and they measure OK so
I assume if I can find others they will be OK..  Also originals will mount
back with ease..      Also need the audio output  6 pin tube socket as it
has been changed out to an 8 pin octal..  I have taken a couple of pictures
and will be glad to send them to anyone who would like to see if they can
help me.  Thanks for your time..  email     w5jdy at cox.net    Joe