[Milsurplus] AN/URT-18, URC-32, KWT-6 transmitter - Part Needed

[Pete Lancashire]

Not sure what your belt looks like but check with Gates(.com) the may have a
replacement also in the past I've had one made, not as strong as a fully molded
one but was good enough for my application, a small XY table.

-pete

On Mon, Nov 15, 2010 at 10:20 AM, Todd, KA1KAQ <ka1kaq at gmail.com> wrote:
> While we're on the subject of the KWT-6/URC-32 family, does anyone out
> there have a source of timing belt for the 786E-1 Frequency Generator?
> Mine is dried out and has the nylon cord showing in places where the
> rubber has fallen off.
>
> Info from the manual describes it as having: pitch .187 in., pitch
> circumference 11.781 in., width .125 in., number of teeth 63
>
> Collins p/n 233-0082-00
>
> I've had zero luck tracking one down in the last 10+ years beyond
> hearing from a fellow in TX who had parts for sale and said he had a
> cross reference number for current production belts, then disappeared.
>
> Once the belt is replaced I can get to working on the stabilized
> master oscillator to get it to sync up again. Right now I'm afraid to
> touch it for fear of the belt breaking and losing the timing. Looks
> like a PITA to re-time.
>
> Would also like to find the .01 kc converter module p/n 528-0397-00 as
> well. Mine has the dummy plug in place.
>
> TNX for any leads or info -
>
> ~ Todd,  KA1KAQ/4
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>