[Milsurplus] BC-348 (0) Speaker

[lobasa]

Hi,
  Although I haven't fired up my BC-348 (0) Receiver in
10 years or so,  I used an LM-380 I.C. Amp.
  I wired it up from the 600 ohm output to the input of the
IC Amp.   I made a power supply for the I.C. amp using
a  I.C. 709 regulator.
  The original was left intact, but a new hole was drilled
and a new volume control was installed.
  I had good results.  Thought I give my two cents in.
                           James Tanton