[Milsurplus] Command set tubes

[Mike Feher]

I have a bunch of NOS 12 volt dynamotors that will work directly with these
receivers. 73 - Mike

Mike B. Feher, N4FS
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960




-----Original Message-----
From: milsurplus-bounces at mailman.qth.net
[mailto:milsurplus-bounces at mailman.qth.net] On Behalf Of Bill Cromwell
Sent: Wednesday, July 21, 2010 12:48 PM
To: milsurplus at mailman.qth.net
Subject: [Milsurplus] Command set tubes

Hi,

I have a pair of Q5er BC-453 receivers here. Both need recapping. I have
to decide how I want to deal with the heater strings in these while the
wiring is accessible. I have lots of 12 volt applications and so 12
volts for the heaters is most easily available here. One suggestion has
been replace the 12 volt tubes with 6 volt tubes and leave the wiring
alone. I started looking at which 6 volt tubes to use and hit a snag
right away with the 12A6 output tube. 6 volt substitutes that I can find
draw far more current than the 6 volt substitutes for the other 12 volt
tubes. I know how to add a resistor to futz with the voltages on each
heater for that situation but why bother. Rewiring for parallel would be
better. Does somebody here have suggestion or a place I can look for the
suitable tubes to retain the series heater stings as-is for 12 volt
operation? I think installing the right 6 volt tubes is my best solution
with a parallel string in second place. Anybody?

73,

Bill

______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html