[Milsurplus] [armyradios] Re: [vmars] Re: [ham-hist] Fox-hole radios

[W2HX]

When I was a kid (not so very long ago) my father taught me how to make one
of these. We made one together using a "safety razor blade" which was the
kind that the handle opened up and the blade set into it.  The darn thing
worked great. I got both stations! WHLI and.ok, maybe one station.

 

I was amazed that a radio could work without electricity. So I then
proceeded to connect it to a bogen amp my father had and we had loud music!
Days of awe.

 

73 Eugene W2HX

 

From: armyradios at yahoogroups.com [mailto:armyradios at yahoogroups.com] On
Behalf Of Robert Nickels
Sent: Wednesday, July 07, 2010 10:42 AM
To: armyradios at yahoogroups.com
Cc: J. Forster; milsurplus at mailman.qth.net
Subject: Re: [armyradios] Re: [vmars] Re: [ham-hist] Fox-hole radios

 

  

On 7/7/2010 8:45 AM, J. Forster wrote:
>
> some years ago there was a thread on another Group about the 
> properties of a Razor Blade detector
>
Back in my yout' I build many of them and the foxhole radio got me 
through several grade school science fairs ;-) Mine were based on an 
article from Popular Mechanics (or Science?) that used a bent safety pin 
as the catwhisker, but with a piece of pencil lead wired to the end to 
actually contact the razor blade. They said a blade with some rust 
would probably work better, and you'd have to probe around to find a 
sensitive spot. They worked as well as my storebought "Remco" crystal 
set, which is to say, you could hear the local BC station but not much else.

> IMO, a comparison between a Razor Blade and a Galena "Cat's Whister" 
> (ie point contact diode) detector would be very interesting indeed.
>
A few years ago I became interested in early solid state and especially 
negative resistance devices, which led me to the fascinating website of 
my pal Nyle Steiner K7NS: http://home.earthlink.net/~lenyr/ 
He's put several photos of the waveform and V/I curve on his negative 
resistance pages that will give you some idea of how well these devices 
perform.

I was able to adapt Nyle's oscillator concept to create a crystal 
controlled RF oscillator using a piece of oxidized galvanized sheet 
metal that could be keyed and even amplitude modulated. We've been 
able to copy the microwatt-level signal from these simple transmitters 
up to several miles away. Our experiments with this type of oscillator 
can be found at his new website: http://www.sparkbangbuzz.com/

I've had many questions after I put up a little Youtube video: 
http://www.youtube.com/watch?v=cDBpBYkRw0Q
but this is more of a novelty than a practical way to communicate. 
Finding a spot that provides the right characteristics to sustain 
oscillation at RF frequencies is painstaking and if you bump the table 
you'll probably go off the air! But making an RF signal using "junk" 
without an active tube or semiconductor is quite a thrill, and I've 
fantasized about how an military radio op behind enemy lines might have 
put this idea to use, had he known about it.

73, Bob W9RAN

__._,_.___

Reply
<mailto:ranickel at comcast.net?subject=Re:%20[armyradios]%20Re:%20[vmars]%20Re
:%20[ham-hist]%20Fox-hole%20radios>  to sender | Reply
<mailto:armyradios at yahoogroups.com?subject=Re:%20[armyradios]%20Re:%20[vmars
]%20Re:%20[ham-hist]%20Fox-hole%20radios>  to group | Reply
<http://groups.yahoo.com/group/armyradios/post;_ylc=X3oDMTJwMWVlOW1hBF9TAzk3
MzU5NzE0BGdycElkAzI2NTc0OARncnBzcElkAzE3MDUwMzQ2OTAEbXNnSWQDNDExNDEEc2VjA2Z0
cgRzbGsDcnBseQRzdGltZQMxMjc4NTE0MDcx?act=reply&messageNum=41141>  via web
post |
<http://groups.yahoo.com/group/armyradios/post;_ylc=X3oDMTJkZ2JzN2Q5BF9TAzk3
MzU5NzE0BGdycElkAzI2NTc0OARncnBzcElkAzE3MDUwMzQ2OTAEc2VjA2Z0cgRzbGsDbnRwYwRz
dGltZQMxMjc4NTE0MDcx> Start a New Topic 

Messages
<http://groups.yahoo.com/group/armyradios/message/41139;_ylc=X3oDMTM1cWE3OGk
xBF9TAzk3MzU5NzE0BGdycElkAzI2NTc0OARncnBzcElkAzE3MDUwMzQ2OTAEbXNnSWQDNDExNDE
Ec2VjA2Z0cgRzbGsDdnRwYwRzdGltZQMxMjc4NTE0MDcxBHRwY0lkAzQxMTM5>  in this
topic (3) 

Recent Activity: 

.
<http://groups.yahoo.com/group/armyradios/members;_ylc=X3oDMTJlb2tvZ2p1BF9TA
zk3MzU5NzE0BGdycElkAzI2NTc0OARncnBzcElkAzE3MDUwMzQ2OTAEc2VjA3Z0bARzbGsDdm1ic
nMEc3RpbWUDMTI3ODUxNDA3MQ--?o=6> New Members 2 

 
<http://groups.yahoo.com/group/armyradios;_ylc=X3oDMTJkOTVvY2Y4BF9TAzk3MzU5N
zE0BGdycElkAzI2NTc0OARncnBzcElkAzE3MDUwMzQ2OTAEc2VjA3Z0bARzbGsDdmdocARzdGltZ
QMxMjc4NTE0MDcx> Visit Your Group 

For current radio net info, see the bi-weekly net 
announcement which is sent to you via e-mail.

The net schedule can also viewed at any time, 
by going to: 

http://groups.yahoo.com/group/armyradios/files/armynets.txt

The URL for the armyradios group at Yahoo is:
http://groups.yahoo.com/group/armyradios

Community email addresses:
Post message: armyradios at yahoogroups.com
   Subscribe: armyradios-subscribe at yahoogroups.com
Unsubscribe: armyradios-unsubscribe at yahoogroups.com
  List owner: armyradios-owner at yahoogroups.com




 
<http://groups.yahoo.com/;_ylc=X3oDMTJjNmhscWM5BF9TAzk3MzU5NzE0BGdycElkAzI2N
Tc0OARncnBzcElkAzE3MDUwMzQ2OTAEc2VjA2Z0cgRzbGsDZ2ZwBHN0aW1lAzEyNzg1MTQwNzE->
Yahoo! Groups

Switch to:
<mailto:armyradios-traditional at yahoogroups.com?subject=Change%20Delivery%20F
ormat:%20Traditional> Text-Only,
<mailto:armyradios-digest at yahoogroups.com?subject=Email%20Delivery:%20Digest
> Daily Digest .
<mailto:armyradios-unsubscribe at yahoogroups.com?subject=Unsubscribe>
Unsubscribe .  <http://docs.yahoo.com/info/terms/> Terms of Use

.

 
<http://geo.yahoo.com/serv?s=97359714/grpId=265748/grpspId=1705034690/msgId=
41141/stime=1278514071/nc1=1/nc2=2/nc3=3> 

__,_._,___