[Milsurplus] Wanted: Manual for Test Set I-135 (for BC-611)

[WA5CAB at cs.com]

John,

You have a bunch of resistors to change.  I have a reprint available of TM 
11-311 on the IE-17-E (Includes I-135-E).  Price depends upon which model 
I-135 you have, as the changes adding the I-135-F, I-135-G, A-82-B and A-82-C 
add pages (and cost and weight).  And would only add confusion if you have 
an I-135-E and A-82-A.  

If anyone has an I-135-B (for use with BC-721), I "built" a manual for it 
(and the IE-17-B) from information in one of the SCR-585 manuals, plus a lot 
of circuit tracing in my I-135-B.  I called the manual TM 11-311B.

In a message dated 6/30/2010 10:58:47 PM Central Daylight Time, 
johnkidd at optusnet.com.au writes: 
> Hi all,
> 
> Does anyone have a manual or schematic available for test set I-135 
> for the BC-611?
> 
> My test set had an open circuit meter moving coil. I replaced it with 
> a Japanese 1mA movement.
> Now it reads about 1/3 of what it should. So I need to massage the 
> meter resistors.
> 
> Oh, I put the movement inside the original meter case so it looks 
> original, no mutilation here.
> 
> Anyone want to tackle rewinding the movement coil :-)
> 
> An interesting observation was that there were two steel screws on 
> the meter case near the magnet poles.
> I assume these were to adjust linearity over the range, as the screws 
> were screwed in at different lengths.
> I have not seen this before.
> 

Robert & Susan Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480