[Milsurplus] Old Philco Plastic Alignment Tool

[gl4d21a at juno.com]

David:

Apparently General Cement has dropped them also.  So, I looked at my alignment tool assortment for a model number, and I have one of the hard black phenolic ones, as well as a newer red PVC model.  Neither has a part number on it.  

I also have a ballpoint pen barrel which I formed around a piece of quarter inch hex stock with a heat gun when I couldn't find the other two tools.  Not sure about the dielectric strength of that one, though.

Good luck,
George
W5VPQ

---------- Original Message ----------
From: "David Stinson" <arc5 at ix.netcom.com>
To: "Old Tube Radios" <boatanchors at theporch.com>, <milsurplus at mailman.qth.net>
Subject: [Milsurplus] Old Philco Plastic Alignment Tool
Date: Fri, 22 Jan 2010 21:07:41 -0600

Philco had a special alignment tool.  It was all-plastic,
with a 1/4 hex "nut-driver" end.  Straight, hard plastic
with flat-faced 1/4 socket on each end.  Once, you 
could get them from tubesandmore.com, but they don't 
list it anymore.  I need on to do neutralization on a mil rig.
Does anyone know a good source?  Thanks.
Dave S.

______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


____________________________________________________________
Hotel
Taking a trip?  Click here to compare hotel rates and find a great deal.
http://thirdpartyoffers.juno.com/TGL2131/c?cp=RvTvyqkp26XbKsMGfC3f7AAAJz3a6InQnTv3qa3N8zFhF0KiAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAATRAAAAAA=