[Milsurplus] Speaking of the GP-7...

[WA5CAB at cs.com]

Dave,

As it was built by A.R.C. (and it's 24 volt), if it had a nameplate, it 
would probably say CBY-62017.  The RU-11/12 and 18/19 receivers and junction 
box use 133's.  It might have been for RU-12.  The equivalent connector (same 
insert) for the GP is marked P-2.

In a message dated 12/21/2010 3:09:48 PM Central Standard Time, 
arc5 at ix.netcom.com writes: 
> Speaking of the GP-7...
> I have a junction box which looks physically like the one
> used for 24 volt GF/RU, but has a different set of connectors,
> including a couple of 133s which are used by the GP and not,
> according to any of my manuals, for the GF/RU.
> The box was built by Aircraft Radio Corp on a special contract
> and is not marked for any specific set.   I have not traced the circuit,
> but it looks very much like it was used to interface the GP transmitter
> with the RU receiver.  Anyone have any docs on this?
> Thanks.  73 Dave S.
> 

Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480