[Milsurplus] BC-348

[gl4d21a at juno.com]

Robert:

Correct me if I'm wrong, but I seem to recall fasteners in WW2 were all slotted head.  Now they all seem to be Phillips, or maybe Pozidrive lately.  What was the time frame when the transition away from slotted fasteners occurred?

73,
George
W5VPQ

---------- Original Message ----------
From: WA5CAB at cs.com
To: milsurplus at mailman.qth.net
Subject: Re: [Milsurplus] BC-348
Date: Mon, 16 Aug 2010 15:21:14 EDT

Larry,

I suspect you mean SO-104. PL-P103 or PL-Q103 are the female connectors 
used on the FT-154 Mount.

If so, original hardware is 1 ea #4-40 x 1-5/8" Round Head (sub Binding 
Head if necessary) plus Ext lock washer to hold the two casting halves 
together. The assembly mounts to the chassis with 2 ea #10-32 x 1-5/8" BH plus 2 Ext 
LW (sub 1-3/4" or sub 2" and cut off, and sub Round Hd if necessary). And 2 
ea #6-32 x 7/16" BH (sub 1/2") plus Ext LW.


In a message dated 8/16/2010 2:01:13 PM Central Daylight Time, 
telegrapher at q.com writes: 
> A BC-348 here had no PL-Q103 in it but i happen to have one in a box out 
> in the shed.  However, there are no mounting screws with it.  Does anyone 
> know what type screws that it takes?  this one is wired for 6.3V for Fil and 
> an external source of 200V for da B+.
> 
> Larry
> W0OGH
> 

Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


____________________________________________________________
$87/Hr Job: 132 Positions in Your Area
No Experience Needed. Make $4000/Mo. No Schedule. See if you qualify.
http://thirdpartyoffers.juno.com/TGL3131/4c69a22c59e9c6fe974st04duc