[Milsurplus] WTB 500-0-500 transformer

[Greg Mijal]

Hi Bob:

I just finished building a power supply for the ART 13 I picked up at the 
Shelby hamfest. The supply is around 70 lbs and very large.  I think your 
500 v supply was throttled back with a 2 amp panel mount Varaicor something 
similar. That's what I had to do with mine.  I used a 5 amp Variac on the 
1100 vdc supply too.  I can hit the correct voltages under load with this 
method .  Just wanted to put my 2 cents in.
73's
Greg
WA7LYO
Kinston NC
----- Original Message ----- 
From: "BOB" <hoopmonk at snet.net>
To: "milsurplus" <milsurplus at mailman.qth.net>
Cc: "boatanchors" <boatanchors at mailman.qth.net>
Sent: Saturday, November 07, 2009 10:33 PM
Subject: [Milsurplus] WTB 500-0-500 transformer


>I picked up a power supply for my ART-13 that is complete except for the 
>400 V supply.The transformer was removed many years ago and the paper work 
>that came with the P.S .says that it was a 110 input 500-0-500 C.T. sec. at 
>300 MA. If anyone has such an animal that is excess to their needs please 
>reply off list.
>
> Bob W1GTH
> 73
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>