[Milsurplus] RU - ZA, More

[Hue Miller]

I thought, well, I'll post the instructions
here and anyone can fill us in on it:
_______________________________

INSTRUMENT LANDING 
CHECK OFF LIST

1. Establish voice comm. with trailer on
____kcs.

2. Turn on ZQ equipment (radioman) glide
path tuned to ____Mcs. and tune RU to
localizer freq. ____kcs.

3. Set ZA control box switches to 'TO' and
'FLIGHT'.

4. Proceed to point about ___ miles from
trailer on ____ leg.

5. Prepare airplane for landing ( floats, props,
power).

6. Fly over trailer 'on course' at altitude of
____feet.

7. When over trailer, note time. Shift switch
on control box to 'FROM'.

8. Continue 'on course'  to point about ____
miles of trailer.

9. Reverse course by procedure turn.

10. Set switches on ZA control box to 'TO' and
'LAND'.

11. Fly base course as modified to maintain 
'on course' and descend to not less than 
____feet.

12. When glide path is intersected, adjust
throttles to descend 'on course'.

13. After passing marker, maintain slightly
nose-up attitude.

14. Upon landing, close throttles until 
slowed down in water.

15. Taxi clear of landing area.

WARNING: DO NOT ALLOW PLANE TO
SETTLE BELOW ALTITUDE OF ____
FEET BEFORE PASSING OVER MARKER.
__________________________________

[ End quote. Man, I'm going to have time
to read all that while landing?
Of course, now that I have posted the text
here for discussion, there's no homework
assignment for those requesting one of these
plates. -Hue Miller ]