[Milsurplus] BC-461

[David Stinson]

----- Original Message ----- 
From: "Mike Morrow" <kk5f at earthlink.net>
Subject: Re: [Milsurplus] BC-461


>>The BC-451-A control box was used to select one of four transmitters,
>>but could the pilot select one of several command receivers in the rack?
> 
> Normally, two-transmitter FT-226/227 racks were used.

I read somewhere- can't remember where- that you could
set the BC-451 to an open transmitter selection (3-4) and 
use the Command Set, via the sidetone, as a back-up intercom.
The headphone stations had selector switches that would 
connect them to the Command Set.