[Milsurplus] ARC-1 to ARC-4 QSO

Pete Williams jupete at bigpond.net.au
Wed Sep 24 08:21:27 EDT 2008



G 'day  list...I sometimes wonder how, with all current technical knowhow,
it seems so difficult to make WW2 radios establish 2 way comms even over
moderate distances
A couple of struggling  guys out our way had great trouble getting out on 80
M over a few miles using ground support field radios and they were the full
bottle on ability.
If such reliability /performance existed in  a real sit.one can only hope
the carrier pigeons  were well fed and on standby.

Cheers
Pete VK3IZ

-----Original Message-----
From: milsurplus-bounces at mailman.qth.net
[mailto:milsurplus-bounces at mailman.qth.net] On Behalf Of Marty Reynolds
Sent: Wednesday, September 24, 2008 10:03 PM
To: robandpj at earthlink.net
Cc: Chris Nardi; mrca; milsurplus
Subject: Re: [Milsurplus] ARC-1 to ARC-4 QSO


> After some crystal grinding to get the rigs on the same frequency, a QSO
> was made between K2WI/m using an ARC-4 in the car, and WW2Y using an ARC-1
> at the K2WI base, over a 2-mile terrestrial path.
>

Big 'Way To Go!!

> Further work needs to be done to boost the modulation of the ARC-1.  K2WI
> had to pull over and turn off the car to hear WW2Y from the speaker.  The
> next thing to be checked is the cathode bypass cap on the modulator tubes.
>

You're onto something  If cap open-circuit there's implicit negative
feedback
w. attendant gain reduction

______________________________________________________________
Milsurplus mailing list
Home: http://mailman.qth.net/mailman/listinfo/milsurplus
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Milsurplus at mailman.qth.net



More information about the Milsurplus mailing list