[Milsurplus] Greasy Dyno

[jcoward5452 at aol.com]

2 years ago, at MRCG 2006, I had a dual BC- 454,and BC-455 setup 
running at the campsite.Well, I got a bit of grief from all the guys as 
to the sound of my dynamotors.So,at dawn on Saturday, before anyone 
else was up,I made a cup of coffee,and then I pulled the dyno's and 
removed the end bells.I removed the bearing covers.I then took the 
dipstick out of my 1600 cc aircooled VW motor,recently rebuilt and with 
an oil change just prior to and in preparation for the 150 mile trip to 
San Louis Obispo.I then used the dip stick to apply a drop or two of 30 
Wt to each bearing.I closed up all the bearings and end bells and was 
then lauded as to the nice smooth purring of the two dyno's.(This is 
field expediant and not recomended as maintenance).(But,it works!).
 I love this hobby!
  Jay KE6PPF



-----Original Message-----
From: w1eof at hamnutz.com <w1eof at hamnutz.com>
To: milsurplus at mailman.qth.net
Sent: Tue, 24 Jun 2008 6:51 pm
Subject: [Milsurplus] Greasy Dyno


Thanks for the suggestions guys. 
 
73, 
 
Mark W1EOF 
______________________________________________________________ 
Milsurplus mailing list 
Home: http://mailman.qth.net/mailman/listinfo/milsurplus 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Milsurplus at mailman.qth.net