[Milsurplus] Restoring an LM-10 need source for 18/4 SOJ type with shield.

[WA5CAB at cs.com]

Glenn,

#18/4 SJO may also be found at places like Home Depot or Lowes but their 
stockage of 4-conductor cordage is somewhat spotty.  However, 18/4 SJO is 
unshielded and the leads are un-tinned.  The latter isn't a major problem but may be a 
little more difficult to get a good solder joint quickly.  I usually dip the 
stripped ends in paint thinner or contact cleaner.

The only shielded I have is #18/10, which is much too large for your 
application.  However. fpr the LM power cord, I don't think you will have any problem 
if you use unshielded.  You might substitute #18/5 but then you may be back to 
looking at a minimum order requirement.

In a message dated 6/6/2007 6:13:54 AM Central Daylight Time, 
glennmaillist at bellsouth.net writes: 
> >Restoring an LM-10 need source for 18/4 SOJ type with shield and black 
> >rubber insulation.
> >Have found Modern  part with 20/4 with shield from Beldon and Alpha 
> >wire.  All sources I have found so far want a 100Ft Minimum order for 
> >~$191.00  Just need ~ 18-24 inches.  Any one have a resource or some cable 
> >to spare?

Robert Downs - Houston
<http://www.wa5cab.com> (Web Store)
MVPA 9480
<wa5cab at cs.com> (Primary email)
<wa5cab at houston.rr.com> (Backup email)
   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/milsurplus/attachments/20070606/365470f7/attachment.htm