[Milsurplus] ARB rx plug needed

[WA5CAB at cs.com]

Ben,

As Meir said, Bill Perry is a good source of connectors for many sets.  The 
ARB/ATB use Cannon K-series connectors, as do other popular sets like ATC, ATD, 
RAX, TCS, etc.  But they are almost unique in using only two basic connector 
inserts throughout the entire system, with alternate contact orientation 
relative to the locating key to make several unique connectors.

The K-series, like the AN, MS, MIL-C 5015, etc. series, have a normal insert 
(contact) angular orientation and several alternates.  Plus of course both 
groups come with straight and right angle backshells.  The two generic inserts 
used in ARB & ATB are WK-C3 and SK-C16.  ATB uses the standard (normal) 
WK-C3-23C-1/2 for DC input.  ARB uses it but in alternate position Y (120 degrees CW) 
which when found as an original will be marked P-721098-4.  

There are two ARB control boxes, Pilot's and Operator's.  The Operator's box 
is only used in multiplace aircraft that carry a Radioman.  If you'll say 
which control box you have, I'll tell you which connectors you need for it and the 
receiver.

In a message dated 1/21/2007 6:43:20 AM Central Standard Time, 
Military1944 at aol.com writes: 
> Hi all, 
>  
>  Can anyone help with a plug for my ARB CRV-46151 receiver please, 16 pin 
> for the control box, 3 pin for the supply. 
>  
>  Many thanks, Ben G4BXD. 
> 

Robert Downs - Houston
<http://www.wa5cab.com> (Web Store)
MVPA 9480
<wa5cab at cs.com> (Primary email)
<wa5cab at houston.rr.com> (Backup email)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/milsurplus/attachments/20070121/33ebded1/attachment.htm