[Milsurplus] 2E22 V 807

[WA5CAB at cs.com]

Ben,

Also, on your question earlier (if anyone answered, I missed it) about how 
the power supplies for the BC-1306 and RT-77/GRC-9 function, no, they do not run 
all sections all the time under all circumstances.  Although achieved in 
different manners, this is true of the PE-237 and both dynamotor supplies.  With 
the OFF-STANDBY-SEND switch in STANDBY, only the 90-105 volt receiver supply 
runs.  With this switch in SEND and the Mode switch in PHONE, the dynamotor only 
runs when the PTT switch on the mic or handset is pressed.  With the Mode 
switch in CW, the dynamotor runs all the time.  The PE-237 is a little more 
complicated but at least from the radio's end of the cable, the results are the 
same.

Robert Downs - Houston
<http://www.wa5cab.com> (Web Store)
MVPA 9480
<wa5cab at cs.com> (Primary email)
<wa5cab at houston.rr.com> (Backup email)