[Milsurplus] Chinese 102 and BC-1306
Military1944 at aol.com
Military1944 at aol.com
Thu Oct 5 04:59:10 EDT 2006
I am just finishing off the psu for my Chinese 102 and have also just
received a BC1306.
I see the supplies needed are quite similar so I shall arrange to use the
same psu for both.
The 102 though switches on the tx ht when the ptt is pressed, so I have
included a relay in the psu to do this.
Am I correct in thinking though that the 1306 power supply sends all the
voltages all the time, I cannot see any control line on my circuit diagram going
from the set to psu. If this is the case I can simply short the relay line in
the lead I use to power the 1306 and leave it to be used in the lead to the
102.
Ben G4BXD
More information about the Milsurplus
mailing list