[Milsurplus] head set info wanted

[WA5CAB at cs.com]

Leigh,

ANB-H-1 is only the individual receiver, not the headset.  There would be two 
of them on most headsets.  The headset nomenclature depends upon what all is 
with it but the two most common ones are HS-33 and HS-38.  HS-33 is the Low-Z 
replacement for HS-23 and includes HB-7 with 18" bail-out cord terminated in 
PL-354 (red) and two off MC-162 or MX-41/AR Cushions.  HS-38 only has the cord 
(no headband).

The stated impedance varies slightly according to various documents but you 
can take it that the receivers are 300 ohm.  So a headset with two would be 600 
ohm.

In a message dated 11/6/2006 12:56:33 AM Central Standard Time, 
jedifox at optusnet.com.au writes: 
> hi group,
>           does anyone have an idea as to what the inpedence of the 
> following headset type is ?
> 
> ANB-H-1 complete
> 
> thanks for the assistance.
> 

Robert Downs - Houston
<http://www.wa5cab.com> (Web Store)
MVPA 9480
<wa5cab at cs.com> (Primary email)
<wa5cab at houston.rr.com> (Backup email)