[Milsurplus] DAG Direction Finder

[Tom Dawson]

Tubing looks like 0.625" it seem to have gotten a little squashed in the 
bending.

ID of the loop itself is 10.25" and outer is 11.5" although it varies a bit 
as the loop is not perfectly round, but pretty close.

Base section of loop that goes down into the radio is 1" OD.  Three banana 
plugs:  Two for about .15" diameter and one for maybe .165.

Sense antenna is 4 sections 57.5" extended and 15" collapsed.  Diameter of 
outer section is 3/8" with a big banana plug on the end that looks like its 
made for a 1/4" socket.

Let me know if you need some pics.

While on the subject of DAG.....Been looking for the AF output 
transformer...something like 12K plate to both 600 ohm phones and 3.2 ohm 
speaker.  UTC # 64624 any sources or subs?

73

Tom WB3AKD


----- Original Message ----- 
From: "David Stinson" <arc5 at ix.netcom.com>
To: "Old Tube Radios" <boatanchors at theporch.com>; "Milsurplus Radios" 
<milsurplus at mailman.qth.net>
Sent: Monday, July 17, 2006 4:18 PM
Subject: [Milsurplus] DAG Direction Finder


> If anyone has the sense and/or loop antennas for the
> DAG portable direction finder receiver,
> could you please make some dimensional measurements
> (loop circumference, diameter, diameter of the loop tube,
> length of the sense antenna, etc.) please?
> Thanks.
> D.S.
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net