[Milsurplus] scr-287 integration question

[WA5CAB at cs.com]

Perry,

That's true but in the case of the wasted day, I didn't have the receiver 
plugged into the PP-380 with the remote attached, but was using an audio level 
unit plugged into the jack on the receiver.  Maybe I was also smoke testing a 
spare power supply??  Can't recall.  Normally (at least these days) I unplug the 
in-service unit from the main PP-380 and hook the unit under test into the 
"system" with a spare cable.

In a message dated 8/20/2006 11:31:31 AM Central Daylight Time, 
w8au at sssnet.com writes: 
> At 03:00 AM 8/20/06, W7QHO at aol.com wrote:
> >The Navy TCS receivers are also muted by removing SG voltage to the 
> >RF and first IF and also the mixer stage.   Have noticed no feed 
> >through with these sets, so maybe disabling the mixer makes the difference.
> 
> They also open the audio output buss (thru the xmtr relay)

Robert Downs - Houston
<http://www.wa5cab.com> (Web Store)
MVPA 9480
<wa5cab at cs.com> (Primary email)
<wa5cab at houston.rr.com> (Backup email)