[Milsurplus] PRC-16/RT-70 antenna elbow

[WA5CAB at cs.com]

Marty,

That's not quite how I'd describe an MT-652/GR.  I don't have any left but 
have had several.  The ones I had consisted of a red/brown phenolic cylinder 
with a metal tube coming out of one end and a male Dzus stud out the other.  
Coming out of the side of the phenolic was a short length of (I think) RG-58/U 
terminated in UG-88/U.  The upper cylinder (thick wall) was threaded internally 
to take MS-117, MS-117, AB-21 or AB-22.  The Dzus stud went through the hole in 
the top lip of the radio front panel and snapped onto the Dzus wire below it. 
 The UG-88 went to the antenna post on the radio.  The whole thing was 4" to 
5" long.  The diameter of the phenolic was somewhere around 5/8" as best I can 
recall.

In a message dated 4/13/2006 4:39:40 AM Central Daylight Time, 
cosmoline at aa4rm.ba-watch.org writes: 
> It's a rt. angle thing caled a MT-652

Robert Downs - Houston
<http://www.wa5cab.com> (Web Store)
MVPA 9480
<wa5cab at cs.com> (Primary email)
<wa5cab at houston.rr.com> (Backup email)