[Milsurplus] PP-106/U info needed.

[D C *Mac* Macdonald]

Oughta run an ARC-5 receiver at the very least, eh?

(;-p)

Mac, K2GKK/5



----Original Message Follows----
From: "Kenneth G. Gordon" <kgordon at moscow.com>
To: Milsurplus at mailman.qth.net
Subject: [Milsurplus] PP-106/U info needed.
Date: Mon, 23 May 2005 15:15:49 -0700

I found 4 of the subject power supplies in my stash of junk.

These are a regulated HV supply.

Input is 115 VAC, 50 - 1200 CPS, 1.6 amps max, 1 phase.

Outputs are 90 to 300 VDC at 10 to 60 mA, or 90 to 270 VDC at
10 to 80 mA, continuous duty.

The pass regulators are a pair of triode connected 1625s.

It also has the following filament voltage outputs: 6.3 VAC at 5
amps, and both 12.6 and 28 VAC at 2.5 amps.

There is a 0 - 500 VDC meter on the front panel.

The main regulator is a 5R4, and there is a 6X5 bias rectifier,
an 0C3 regulator as the standard, and a 6SJ7 as the regulator
which drives the 1625s.

They sure weigh a lot.

Would anyone happen to know what this originally went to?

Ken W7EKB