[Milsurplus] TBW conectors

[Richard Brunner]

Ray said:

" ...... I am in the process of restoring a TBW-3 transmitter. have had no 
real issues yet except one thing. I need the two plugs that are used to make 
up the jumper cable that goes between the center "power" unit to the "HF" 
transmitter unit. It's the old style push plug with pop up lock pin, the 
same style as were on the TBX radios but with eleven pins (female), ..."

Ray, OM, you can make your own.  The large Bullet connectors make a snug fit 
on the banana pins.  I used the double-end bullet connectors, (Mouser 
ME159-1501) cut off the insulation and soldered a wire to one end.  Then 
make an insulating plate to hold them in place, and you have a servicable 
connector.

Richard Brunner, AA1P